Changsha HCADTO Stainless Steel Co., Ltd.

The chemical composition of   stainless steel angle bar   belongs to the rolled steel series for structural use and the main inspection indicators are C, Mn, P, and S. According to different brands, the content is different, the range is C<0.22%, Mn: 0.30-0.65%, P<0.060%, S<0.060%. Inspection method: When testing the chemical components, the commonly used standard inspection are GB223, JISG1211-1215, BS1837, BS Manual 19, ГОСТ22536, etc. HCADTO Stainless Steel Co., Ltd.  can produce stainless steel product of various materials shape with complete specifications and has a large number of stock available all year round. In addition, our company can process according to customer requirements.

The density of   310S stainless steel plate   is 7.98 310S stainless steel, also known as 06Cr25Ni20 and 2520 stainless steel plate is a high-alloy stainless steel which belongs to the 25Cr-20Ni series with excellent high temperature oxidation resistance. It is suit to make various furnace components for its maximum temperature is 1200 °C and a continuous use temperature of 1150 °C.  Executive standards: ASTM A240/ASME SA-240, ASTM A276, ASTM A182/ASME SA-182, ASTM A312/ASMES A312 HCADTO Stainless Steel Co., Ltd.  can produce stainless steel product of various materials shape with complete specifications and has a large number of stock available all year round. In addition, our company can process according to customer requirements.

1. If the size of the   stainless steel plate   is thicker, the bending strength required is greater and with the thickness of the stainless steel sheet increases, the bending strength of the sheet should increase. 2. Under the unit size of stainless steel processing and bending, the greater the tensile strength, the smaller the elongation rate, so the greater the required bending force, the bending angle should be bigger. 3. If the thickness of the stainless steel plate corresponds to the bending radius, the unfolded size of a bending workpiece should be the addition of the right-angled sides minus the two plate thicknesses, which can meet the design accuracy requirements. 4. If the yield strength of stainless steel is larger, the elastic recovery will be larger. If the angle of 90 degrees of the bending part can be obtained, the angle of the pressing knife should designed smaller. HCADTO Stainless Steel Co., Ltd.  can produce stainless steel product of various materials...

Stainless steel plate   is closet to our daily life. Many people are interested in the bearing capacity of stainless steel plate. In fact, its bearing capacity can prove its quality. Let's to find out: 1. The stainless steel plate take pot-bottom type structure. The design of the structure increases its force-bearing area to make the force uniform. 2. In terms of material, the wear-resistant layer of the stainless steel plate is made of multi-colored quartz sand and added stabilizers, which improved the wear-resistant performance of the product. 3. The continuous reinforced fiber skeleton ensures the high bearing capacity of the product and avoids the separation and shedding of the composite products due to the use of reinforcing materials such as steel bars. 4. Taking the layered composite process to meet the requirements of institutional innovation and material innovation. Different reinforcing materials are used in different parts of the stainless steel plate to avoid separation...